SPRAY PAINTED | For the almost-artist
Use a cleaning solution to remove any dirt or other residue from the top of the board.
Use sandpaper to scuff up the top of the board.
Fill the binding holes with cotton swabs.
Wrap tape around the edge of the board.
Apply the primer to the board. Plastic primer is best.
Apply the spray paint to the board (the more flexible the paint, the better).
Apply multiple layers of clear coat to the board, the more layers the more durability.
* Spar urethane (aka spar varnish) is a great clear coat option.
Remove tape and cotton swabs.
Apply buffing compound to make it shine.
* For added durability, use 400 grit sandpaper or steel wool to lightly sand in between the spray paint and clear coat layers.