Submitted by Christian on November 12, 2013 at 11:20 am

Consider your new Blank board a blank canvas. While there are many ways to get artwork onto your board, one of the easiest and most durable is with a vinyl wrap. You make the design, send it to us, we get it printed and installed, and send the board to you, ready to ride.

To make things easier, we have a bunch of templates that you can use to lay out your graphics and get them just right. Download this file for six different formats: Photoshop, Illustrator, EPS, PSD, JPEG, and TIF. These templates are sized for a 155 cm board, but can be used for any size board by running your graphic a little long or leaving it a little short. You need to leave some bleed* over the edges anyway, and the print shop will make sure it’s all good before they print anything.

When your design is ready, just order your board and add the Custom Graphics to your shopping cart. After you check out and pay, you will get an order confirmation email, showing the custom graphic item. Reply to that email with your custom graphic, and we will work with you to make sure it is formatted correctly and all that technical jazz. Then we take your board from our warehouse over to the print shop and let them work their magic. When your custom board is ready to ship, we pick it up, make sure it looks awesome, pack it up, and ship it out.

It usually takes about five business days to get the board printed and shipped, starting at the time we get the graphic design finalized.

The print shop we use for this is really good at what they do, and regularly do jobs for big names like Red Bull, DC Shoes, etc. They’re all snowboarders too, and will make sure your board is going to look great. These are a few guidelines they sent over to help create your graphics right:

– All images submitted at appx. 75 dpi at 100% size. Meaning if a graphic is going to cover a 150cm deck (overall dimensions of appx. 11.5″w x 60″h) the artwork should be setup at a resolution that when scaled to the full size dimensions it displays at appx. 75dpi. If artwork is supplied at 50% scale (5.75″w x30″h) the artwork should be about 150 dpi; 25% scale (2.875″w x 15″h) artwork should be about 300 dpi. This number can vary up or down a bit, but we wouldn’t want anything submitted lower than 50dpi at 100% size or we run the risk of pixelization and low image quality.

– Artwork should contain appx. 1″ of bleed around all edges of artwork. So, if setup to cover a 150cm deck (overall dimensions of appx. 11.5″w x 60″h) the production graphic should be sized to roughly 13.5″w x 62″h. This is critical in mounting to the deck to achieve a clean bleed and to allow a little give when lining up to the deck. The extra graphic (bleed) is trimmed off during production. Obviously, overall dimensions will vary based on the size of deck. 150cm is only used as an example.

– Artwork should not contain critical elements or information close to the trim edge of the graphic or board. This is also the reason for needing the 1″ bleed and flexibility when aligning the graphic for mounting. Please allow appx. .5″ of ‘buffer’ space between the board (trim) edge and any critical elements.

– If text or fonts are used in the design please convert to OUTLINES prior to submitting. This will ensure there are no issues with mismatched fonts not found on our system.

*The “bleed” referred to here simply means that you should not crop your graphics to the shape of a board. The graphics need to extend off all edges of the board in order to fully cover it when they are applied.

View Comment(s)

Submitted by Jeff on January 29, 2013 at 2:02 pm

Artist Allie DeSantis has been doing board art for customers for a while now. However, she recently decided to challenge herself by designing her own board. She used a Blank snowboard to do it and the result is stunning. See for yourself.

Allie told us a little bit about the process and said “It was just a challenge for me! It helped me find other ways to create. This was a breakthrough for me, I am so proud of how it came out! I hope you like it.”

We love it.

Check out more of her board art below:

View Comment(s)

Submitted by Christian on January 2, 2013 at 3:35 pm

Check out this photo of one of our “new” Blank riders, David, a retiring engineer. For his retirement gift, his coworkers hooked him up with a customized Blank board. David started riding a few years ago, and at age 67 plans to camp out in his RV at Mt Hood and shred the mountain!

View Comment(s)