DIFFICULTY: Medium
DURABILITY: High
COST: Around $15 per square foot (extra $20 for laminate)
SUPPLIES:
- Blank snowboard
- High-resolution graphic
- Vinyl printer and vinyl (or a print shop)
- Razor blade
- Flat object for smoothing
DIFFICULTY: Medium
DURABILITY: High
COST: Around $15 per square foot (extra $20 for laminate)
SUPPLIES:
STEP 1:
Create a high resolution, rectangular graphic that will cover the entire board.
STEP 2:
Find a print shop that has a vinyl printer/cutter and give them your file for printing.
* Many printers will also be able to add a laminate on top of the ink which will increase durability, but it is not necessary.
STEP 3:
Use a cleaning solution to remove any dirt or other residue from the top of the board.
STEP 4:
Apply vinyl to the board, moving from one end to the other.
* It may be easiest to tape the vinyl down in the middle and only do half at a time.
STEP 5:
Use a flat object to smooth out any bubbles as you go.
STEP 6:
Gently poke any remaining bubbles with a razor blade and then smooth them out.
STEP 7:
Use a razor blade to cut off excess vinyl along the edge of the board
STEP 8:
Use a razor blade to remove the vinyl blocking the binding holes.