BOARD STIX SNOWBOARD TUTORIAL - For the Quasi-Indecisive Artist

DIFFICULTY: Easy
DURABILITY: Medium
COST: $40 for a kit
SUPPLIES:

  • Blank snowboard
  • BoardStix Kit

You can read more about BoardStix on our blog here.

STEP-BY-STEP INSTRUCTIONS

STEP 1:
Use a cleaning solution to remove any dirt or other residue from the top of the board.

STEP 2:
Prime your BoardStix by shaking them well and pressing down on the tip several times until they are saturated with color.

* We found that if you apply a light coat of clear finish and let it dry before applying the BoardStix they won’t discolor your white board after removal.

Blank Snowboards - Customize Your Snowboard - BoardStix - 01

STEP 3:
Apply the BoardStix just like you would any other paint pen or permanent marker.

* Make sure one color is dry before you add another color on top of it so that they don’t mix.

Blank Snowboards - Customize Your Snowboard - BoardStix - 02

STEP 4:
Wait a few minutes for your design to dry.

STEP 5:
To apply the clear finish, hold the can 10-12 inches away from the board and spray in a sweeping motion.

Blank Snowboards - Customize Your Snowboard - BoardStix - 03

STEP 6:
Let the clear finish dry for 3 hours, then you’re ready to ride.

* When you’re ready for a new look, simply use a mild glass cleaner to remove the original design. We found that using an abrasive sponge is the most efficient way to remove the BoardStix.

Note that BoardStix are not 100% removable on a white Blank snowboard and do leave some faint coloring.  To avoid discoloring, add a light coat of clear finish and let it dry before applying the BoardStix they won’t discolor your white board after removal.

You can purchase BoardStix here.

Blank Snowboards - Customize Your Snowboard - BoardStix - 05

FINISHED BOARDSTIX PAINTED SNOWBOARD

Blank Snowboards - Customize Your Snowboard - BoardStix - 04

Boards

Leave a Reply

Updating…
  • No products in the cart.
Previous Next
Close
Test Caption
Test Description goes like this